PACKAGE INCLUDE: 20 sheets medium weight paper backed fusible web, which size is 8" x 12"(21*30cm), designed and optimized for applique. Double sided fusible interfacing designed for gluing two items together
How To Use Double Sided Iron On Adhesive Film Sheets Make sure it always attaching two pieces of material together 1. Align the side of the hot melt adhesive film with the side material that needs to be bonded, and the release paper side is facing up. Placement sequence: Release paper layer/film layer/Material A 2, use a relatively low heating temperature on the side of the release paper to warm, so that the film is bonded after melting.（iron time 3 seconds at the 135-160 degrees ） 3. Wait for the heating and bonding to cool and tear off the release paper. 4. Align the adhesive surface of material A with the adhesive surface of another piece of material B. Placement sequence: Material A/ Hot melt adhesive layer/Material B（（iron time 10-30 seconds at the 135-160 degrees ） Application: This hot melt adhesive shaping film is suitable for all kinds of products that need to be shaped, such as bags and shoes, and can support the required hardness Tip :adhesive film should not exceed the edge of the adhered material， Also: make sure that when you're cutting it, the paper part is facing up against the scissor blade (as opposed to the side w the adhesive on it), and make sure to use clean, sharp scissors