بحث

بحث

أداة التخريش من نوع المشبك المحملة بنابض سعة 3-25 مم - ساق 5/8 بوصة × 3/8 بوصة للمخارط

KWD 12.500
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
– 1 +

مميزات خاصة

  • Clamp Type Knurling Tool with knob. This design helps reducing the load on the lathe spindle bearings compared to any other standard knurling tool
  • Holder Size (Inch) : 3/8" x 3/8" Square Holder Size x 3" Long Tail (mm) : 16 x 9.5 x 75 mm.
  • Knurl Dim.(mm) : 19 x 9.5 x 6.35 mm Working Capacity (mm) : 3-25 mm

وصف

Description Clamp Type Knurling Tool with knob. This design helps reducing the load on the lathe spindle bearings compared to any other standard knurling tool. Pressure is applied via the turn screw instead of the lathe cross slide. Ideal tool for a small to medium sized lathes. Features medium diamond pattern knurls. Holder Size (Inch) : 3/8 x 3/8 x 3 " Inches Holder Size (mm) : 9.5 x 9.5 x 75 mm Knurl Dim. (inch) : 3/4 x 3/8 x 1/4 Inches Knurl Dim. (mm) : 19 x 9.5 x 6.35 mm Working Capacity (mm) : 3-25 mm

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}