SUITABLE FOR 12VOLT LEAD-ACID BATTERY

We strongly recommend that you use a Lead-acid-compatible charger. 12V chargers for LiFePO4 batteries will work, but will reduce the performance and life of the battery.

CHARGER RATING

Input 100-240 volts, 50/60 Hz. Output : 12volts, 5amps ±0.2

TERMINAL CONNECTIONS

XLR-3Pin to use. Insert the XLR-3Pin head into the battery end. When charging, the red light on the charger will light up. When the battery is fully charged, the indicator turns green.

HOW FAST WILL MY BATTERY CHARGE?

Choose a 5amp. To determine charging speed, divide the amperage (Ah) rating of the battery by the amperage rating of the charger. For example, a 5amp charger will charge a 20amp battery (Ah) in 4 hours.

CAN I CHARGE MY BATTERY FASTER?

For most applications, a charge time of 3-10 hours provides the longest battery life. But if you have an application that requires fast charging, lead-acid batteries can be safely charged in less than 1 hour (1C rate). For example, you can use a 10 amp charger and a 10 Ah battery with a charge time of 1 hour. Charging at 1 hour does reduce service life. In our laboratory tests, we found that the longest life of lead-acid batteries is at a charge speed of 0.3C or less (we recommend that the charger has an amperage rating of 1/3 of the battery's ampere-hour rating or less for maximum life).

AT WHAT VOLTAGE SHOULD 12V LEAD-ACID BATTERY BE CHARGED?

The full voltage of 12V lead-acid battery is 13.8V, it is recommended to charge the battery under the remaining 50% of power, which can effectively protect the battery.

APPLICABLE TO:

Fast charging 12V battery

The charging rate is 5amps

Best for 10ah, 20ah, 30ah batteries (with BMS system)