The 29 piece Detailer Polishing Kit conveniently provides a wide variety of different sized pads with varying softness and stiffness, so that you can cut, polish and wax as needed. Simply attach the pads to your electric drill and apply polish to buff out scratches, and refresh your vehicle's paintwork, time and time again. Wash out the pads between uses with soapy water, rinse until clear, then store them away for future use in the storage container provided. For minimal cost, and very little effort, you can keep your car looking like it just rolled off the production line! Instructions: 1. Attach the backing plate to your electric drill, then attach a polishing pad to the backing plate. 2. Apply polish to the polishing pad. Place the pad against the panel you are working on, and smear it across the surface to evenly spread the polish. 3. Turn the drill on low speed to continue distributing the polish, then use a higher speed to polish the panel. 4. Repeat this process until scratches and imperfections are gone. Buff excess polish away with the soft woolen pads. Package Contents: 3” diameter: 1 x Wool pad, 2 x Microfiber Buffing Pads, 1x Thread Backing Pad, 5 x Mixed Color Polishing & Buffing Pads. 2” diameter: 1 x Wool pad, 2 x Microfiber Buffing Pads, 1x Thread Backing Pad, 5 x Mixed Color Polishing & Buffing Pads. 1 ¼” diameter: 1 x Wool pad, 2 x Microfiber Buffing Pads, 1x Thread Backing Pad, 5 x Mixed Color Polishing & Buffing Pads. 1 x DA Thread Adapter. 1 x Thread Adapter. 1 x Portable Carry-case.