Nanoskin ULTRA LINE, CRYSTAL WASH adds hydrophobic protection to your weekly maintenance wash. Having hydrophobic protection on your vehicle encourages water-borne dirt and contamination to slide away, rather than stick. Treated surfaces stay looking cleaner for longer and because dirt doesn't bond as readily, cleaning the car is much easier! With neutral pH, high lubricity formula, CRYSTAL WASH is designed to work on its own or to boost existing wax, sealant or ceramic coating layers. It is safe on all surfaces including paint, rims, glass and plastic and it will add instant protection to these surfaces, or boost any protection already applied. Simply wash your car the same way you would with any other auto shampoo, rinse off, and stand back to admire the results. Note: For heavily contaminated cars, CRYSTAL WASH should be applied after the main wash process. DILUTIONS: Hand Washing 200: 1 - 400: 1 Pressure Foam Cannon 10 : 1 EVERGREEN Shampoo Gun 200: 1 DIRECTIONS: For Hand Washing & EVERGREEN Shampoo Gun - 1. Mix 0. 6 Oz. (15-20ml) of CRYSTAL WASH per gallon of water in a bucket. 2. Rinse surface with water to flush away loose dirt. 3. Wash entire car with wash mitt in straight motion. Begin with the roof, and work the suds down to the hood, trunk and sides. 4. Rinse well with clean water. 5. Dry with a suitable drying towel. Note: Do not wash in direct sun, do not let product dry during application. For Pressure Foam Cannon - 1. Pour 3 Oz. (90-100ml) of CRYSTAL WASH into a standard foam cannon bottle and mix with water. 2. Rinse surface with water to flush away loose dirt. 3. Spray onto the surface, wash with wash mitt in straight motion. Begin with the roof, and work the suds down to the hood, trunk and sides. 4. Rinse well with clean water. 5. Dry with suitable drying towel. Note: Do not wash in direct sun, do not let product dry during application.