YOTENKO 6 dBi 915MHz panel directional antenna w/ SMA Female Cable - 17cm
Specifications:
Gain: 6 dBi
Frequency: 902MHz-928MHz
Connector: SMA Female Jack
Cable Length: 22cm/ 8.66ft
Cable Type: RG303
V.S.W.R: ≤1.5
Impendence: 50ohm
Weight: 417g±2g
Introduction: 915MHz panel directional antenna. Size of the antenna is 164mm* 164mm*29mm. With a SMA Female connector, it can be applied to such devices with frequency of 915MHz as wireless module, network devices.
_________

The installation environment for the 915MHz Panel Antenna can have a significant impact on its performance. Here are some of the key requirements to keep in mind when installing this antenna:

1. Line of sight: The 915MHz Panel Antenna is a directional antenna, which means that it needs a clear line of sight to the device it is communicating with. When installing the antenna, make sure that there are no obstacles blocking the signal path, such as buildings, trees, or other structures.
2. Mounting location: The antenna should be mounted in a location that provides a clear view of the surrounding area. Ideally, it should be mounted as high as possible to maximize its range and coverage. The mounting location should also be stable and secure, to prevent the antenna from moving or vibrating in high winds or other adverse weather conditions.
3. Grounding: The antenna should be properly grounded to protect against lightning strikes and other electrical surges. This can be done by connecting the antenna to a grounding rod or other suitable grounding system.
4. Cable length: The cable connecting the antenna to the device should be as short as possible to minimize signal loss. If a longer cable is required, it should be a high-quality cable with low loss and impedance matching.