MakerFocus DC إلى DC Boost Converter، جهد إدخال DC 4-35V إلى DC 5-45V وحدة جهد تصعيد قابلة للتعديل لإمداد الطاقة المستقر، منظم جهد اللوحة الشمسية أو أي غرض آخر
Practical Boost Converter: When there is no higher voltage power supply to drive electrical equipment, you can use MakerFocus boost converter. If the output voltage does not match the electrical equipment, you can manually adjust the output voltage
Easy Handling: The inputs and outputs of the boost converter are designed with screw terminals for easy connection and disconnection of wires
LED Display: Boost Converter has the function of displaying voltage and can accurately measure the voltage value. The display screen displays the output voltage by default. If you need to check the input voltage, press the voltage switch key
Widely Application: DIY high current mobile current and can be boosted to 5V by a single Li-ion battery. Super high current output with USB port and identification resistor, 2.5A high current output. It can charge several mobile phones at the same time; DIY stable power supply; power supply for electronic devices; car power supply; DIY high power laptop mobile power supply; used as solar panel regulator
How to Use: Connect the power adapter to the input terminal of the boost converter and check the output voltage. If the output voltage does not match the electrical equipment, use a screwdriver to twist the potentiometer. After confirming that the output voltage is OK, connect the electrical device to the output terminal
وصف
Description:
When there is no suitable high-voltage power supply to match and drive the load, you can choose MakerFocus booster converter;
This module has a voltage display function that can display input voltage and output voltage;
The test accuracy is high, and the output voltage can also be adjusted manually.
How to Use:
1. Connect the input end of the module to the power supply. The applicable power supply voltage is 4-35V. Please pay attention to the positive and negative poles;
2. Turn on the power switch, and the screen will display the boosted output voltage;
3. If the output voltage does not meet the working voltage of the load, the voltage can be adjusted through the potentiometer;
4. Connect the output end to the load, please pay attention to the positive and negative poles;
5. Press the voltage switch key to switch between output voltage and input voltage.
Parameters:
Input voltage: 4-35V
Output voltage: 5-45V
Output current: Max 5A
Maximum power: 100W
Voltage control accuracy: 0.1V
Size: 72*48*18mm
محول إمداد طاقة HQRP DC-DC 12/24 فولت إلى 5 فولت 3 أمبير 15 وات مع موصل سلك مفتوح متوافق مع راديو السيارة، وكاميرا داش، ومنظم جهد مقاوم للماء لنظام تحديد المواقع العالمي (GPS)
KWD 4
مصدر طاقة تيار متردد 220 فولت/50 هرتز - محولات جهد وتردد تصاعدية 1000 فولت أمبير/900 واط
KWD 358
-10%
لوحة توزيع تيار متردد/تيار مستمر سلسلة PD4560 إنتلي باور 4500 من بروجريسيف دايناميكس - 60 أمبير
KWD 156.500
محول، WG-24S1260 24 فولت إلى 12 فولت 60 أمبير 720 وات DC-DC محول فرق الجهد غير معزول، مصدر طاقة عالي الطاقة
KWD 31
