SPECIFICATION
Working Amp :20mA max
Peak Amp :2A max
Peak Voltage :60-100V
Pulse Frequency :10,000HZ
Cutoff amp :5mA
Voltage:12V,24V,36V,48V combined,manual setting
Remaks:LED light indicates when pulse working

FUNCTION
-Batteries often fail because “sulfates” slowly develop and cover the battery plates. This sulfating process gradually impairs battery function and causes a capacity loss until the battery can no longer perform the desired task .
-The high-frequency peak pulse delivers an electronically controlled pulse to the battery causing crystalline sulfates to dissolve back into the electrolyte.
Rrestoring battery function and electrolyte strength regaining the batteries ability to receive charging currentand deliver discharge current.

Q&A

1. How to use this battery desulfator?
Firstly, connect your battery bank to the battery charger. After finish the charging process, connect the battery bank to the desulfator.
Then it displays battery voltage and automatically selects 12, 24, 36 or 48 volts. Red light flashes as it pulses the battery. This process is a one time cycle.

2. What are the targeted battery types and situations?
-Storage battery, winter maintance
-3 years old battery or younger
-12V 24V 36V 48V battery bank

3. Can it be used in lithium batteries?
No. It only can be used in lead acid batteries. Also, it can not desulfate battery with damaged plates.

4. How can I feel the improvement?
You can record the discharging time of your battery before and after you desulfate the battery.

Your attention please:
Real-time voltage showing on LED tube may have 0.1-0.3V deviation from multimeter, occasionally 0.4-0.5V.
This is normal, because there are difference between devices. And this will not affect maintenance and recovery function.