Key Features include HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length; KD-X222PO: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply; Signal Extension: Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling; Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling; Up to 250 ft. @ 1080p /1920x1200 using KD-CAT6STP1X cabling; Up to 230 ft. @ 1080p /1920x1200 using third-party CAT5e/6 cabling; ; HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant; HDR (High Dynamic Range): More life-like images through a greater range of luminance levels; 4K/UHD Resolution: Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit; Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit; 3D: Support for standard 3D stereoscopic signal formats; Low Profile: Super slim chassis design; HDMI and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s; EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx; Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices; Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control; IR Sensor: Sensor powering via +5V on Rx unit?s IR In port collects line-of-sight IR from remote(s) without external IR connecting block; Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units; RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector; Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as