بحث

بحث

بيت / GO-3D PRINT / قطع غيار وملحقات الطابعة ثلاثية الأبعاد
GO-3D PRINT 250 مم × 300 مم لوح من زجاج البورسليكات لطابعة Qidi X-Max ثلاثية الأبعاد in Kuwait GO-3D PRINT 250 مم × 300 مم لوح من زجاج البورسليكات لطابعة Qidi X-Max ثلاثية الأبعاد in Kuwait

GO-3D PRINT 250 مم × 300 مم لوح من زجاج البورسليكات لطابعة Qidi X-Max ثلاثية الأبعاد

KWD 14
– 1 +

مميزات خاصة

  • Size: 250mm x 300mm x 3mm
  • Tips: apply a light layer of hairspray or glue stick helps to protect the surface of the glass to avoid damage from some special materials
  • Flat Polished Edge for safe to handle
  • Designed by GO-3D Print in California

وصف

Glass is a universal print surface for 3D Printing. Almost all types of filament will print to glass in one way or another. Just place the glass on your print board and clip it in place! To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. For Nylon, we've found a light coating of UHU Glue stick seems to do the trick! If you don't yet have a glass surface, you'll want this one! This glass has been specially ordered and modified for use in 3D Printers. This type of glass is not available at your local hardware store or big box home center. Size: 250mm x 300mm x 3mm, good fit Qidi X-Max 3D Printer and all 3D Printers with 250mm x 300mm or bigger printbed.

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}