How to use :
1. Check and confirm the bearing capacity and working stroke height of the jack, which shall not exceed its rated load when used.
2. Before lifting, stop the vehicle on the level and hard road (the maximum slope shall not be greater than 6°)
3. Put the manual gear into the first gear or reverse gear, and put the automatic gear into the P gear, and pull on the parking brake of the hand brake.
4. Block the wheel which is on the diagonal of the broken tire with a big stone or something.
5. Loosen the nut of the wheel to be replaced, but do not unscrew at this time.( important )
6. Place the jack under the jacking position specified by the automobile factory, and Rotate the jack to the proper height by hand.
7. Shake the handle to raise the vehicle to a proper height, screw off the wheel nut and replace the tire.
8. After changing the tire, screw on all the fixing nuts of the tire by hand. Do not lock the fixing nuts of the tire by force. First, lower the jack, take out the jack, and then use the Lug wrench lock the tire retaining nuts.( important )

Specification:
Product type: Scissor Jack
Maximum load capacity: 3.0T (6,614 lbs)
Minimum lifting height: approx. 105 mm/4.1"
Maximum lifting height: approx. 438 mm/17.1"
Jack dimensions: 480x105x 105mm(18"x4.1"x4.1" )
Jack weight net: 2.7 kg/ 5.94lbs

Package :
1 x Scissor Jack 3.0 Ton
1 x Ratchet Wrench