We at SRAM saw the opportunity to make a better press fit system where all the best from BB30 and Press Fit bottom brackets would be combined into one captivating package. Press fit 30  will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Press fit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Press fit 30 for road will require a 68mm wide shell while Press fit 30 for MTB will require a 73mm wide shell.