Product Description
Application:
-- Help with the installation and re-sizing of the 4L80E & 4L85E Turbine Shaft Seals.
-- Works with all input shaft lengths
-- Similar to Kent-Moore J-38736, Atec Trans-Tool T-2974 & T-2974-M

Function:
-- The re-sizer prevents improper installation and damage of the seals.
-- Prevent distortion during installation.

Simple to use:
1. Properly remove the old seals, make sure all seal debris is removed from each groove.
2. Lube the grooves, new seals, and tools with trans-gel.
3. Expand the seals for the small end first to the proper ID.
4. Center the new seals in the grooves and gently apply finger pressure to ensure the seals are inserted into the grooves.
5. Slide the small re-sizer over the seals using the LONG TAPERED END first, this will ensure the seals are gradually seated into the grooves. NOTE: using the short tapered side first may cause the seals to roll out of the grooves and permanently damage them!!!
6. Let the re-sizer set the seals for at least one minute, then flip the re-sizing tool now using the SHORT TAPERED SIDE to insure both seals are properly sized.
7. Repeat the same steps for the large end making sure all grooves, seals and tools are properly lubed with trans-gel before installation.

100% Satisfaction Guarantee:
Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months? warranty

Go click the Buy Now Button and get it with confidence!
If you have any problem about your order, please feel free to contact us.