Bettomshin TDS Tester

Specification:
1.Button: with 3-HOLD, TEMP, ON/OFF;
2.About TEMP Function: The meter has automatic temperature compensation function.

Method of Operation
Turn on the TDS meter then put titanium alloy probe into water and stir water gently, stable reading will be auto-blocked on LCD in seconds.

Material: Plastic and Titanium Alloy
Model: TDS-3
Button: With 3-HOLD，TEMP，ON/OFF
Range :1-9990 PPM
Accuracy: ±1%
Color:Gray Tone
Degrees Celsuis:0-50℃
Length:142mm/5.59"
Width:23mm/0.91"
Height:13mm/0.51"
Package Content
1 x TDS Tester

Button Function
1.Hold Function: Saves measurements for convenient reading and recording.
2.TEMP Function: The meter has automatic temperature compensation function.
3.ON/OFF: on and off.(Tester will automatically shut off to save battery power without pressing any key within 10 mins.)

Notes:
1.The solution should not over the immersion level.
2.Please clean the electrode after using,turn off and replace the protective cap.