Description

1. Fix this strobe controller in car
2. Touch its switch to change flash modes, long press 1.5 second to shut down
3. If the indicator doesn't work, please check the wire connection first and then fuse inside of the box.

Attention:
1. Working voltage: 12V DC
2. Max. power: 12V/48W
3. Working temperature: -40 to 50 Celsius
4. Dimension: 46x28x13mm
5. Housing Material: black ABS
6. Flash modes:
a. long light mode
b. 4 group lights flash alternately
c. 12 group lights flash together
d. alternately flash
e. 3 group lights quick flash alternately
f. 4 group lights flash together
g. 4 group lights flash alternately fisrt, then flash together
h. all lights flash alternately and off
i. all lights flash alternately and off, then flash and off together
j. all lights flash and off together

Using method:
1. Connect cable with strobe controller. In order to prevent poor contact, please connect the cable carefully.
2. About the red & black cable (about 1.2m length): connect the red cable with positive electrode of power, and black cable with negative electrode.
3. About black white & black cable (about 3m length), 2 pcs, black white cable connect with light positive electrode, and black cable with negative electrode.
4. Turn on the input power, press strobe controller MODE button for 2 to 3 seconds to launch this controller. Short press MODE button to change flash modes.
5. Avoid water and solarization With fixed sticker for the strobe controller and LED indicator on the controller
This is 2 way strobe controller

Package include:
1 x Strobe controller
1 x Cable bundle
1 x Paster