Search

Search

JK Turn Signal Light Socket, Front Parking Lamp Bulb Plug Socket Compatible with 2007-2018 Jeep Wrangler JK JKU

KWD 5.500
Brand
Sheisor
Weight
32 g
Size1 PCS
– 1 +

Special Features

  • 1 pair of front park and turn signal light sockets for 2007-2018 JK JKU, fits a standard 3157 bulb
  • Your JK or JKU front turn signal is not working because of a burnt connector. This JK front turn signal bulb socket will solve the problem
  • Direct replacement, make sure the bulb 'clicks' into the socket. it's a tight fit and if it doesn't 'click' into place the time your hit your breaks the bulb will come out of the socket
  • Installation is straight forward plug-in-play and takes a couple minutes: You don't even have to pop the hood to get to the parking and turn signal socket, remove the part from headlamp twisting a quarter turn counter clockwise. Test the bulb connect before replacing the unit as it requires some pressure inserting it
  • Tips: You don't even have to pop the hood to get to it, reach in through the wheel arch grabbing the turn signal socket the wiring harness will have a locking tab on it. you push down on that tab as you pull out and keep it unlocked. rotate the socket about 30 to 45 degrees and then pull out. The soket seal may be a lot tighter than you old part. so you need to push a little to get it to fit. Obviously, the tighter seal should do a better job of keeping all that rain and mud out with the socket

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}