[Upgraded Brake Calipers] - The rear brake caliper has a reset spring and retaining bracket that prevents the pads from coming loose. This assembly comes with pre-installed brake pads plus 1 set of spare pads. This ATV master cylinder is designed with a precision-made piston using low-pressure casting technology. This strengthens the cavity so it can withstand strong, continuous braking forces
[Clever design]: The upper pump force point of this rear brake caliper is in the lower hole, the upper pump mounting hole is long hole on the top, and the fixing hole is in the lower. Will not loose, more convenient installation
[Dimension] - Brake Caliper Mounting Hole Distance: 62mm / 2.44inches, Install Hole Diameter: 8mm / 0.31 inches,Brake Tubing Length: 500mm/20 inch ,Mounting holes and other dimensions of the product are shown in Figure 2
[Bolt On And Go] - Package Contents: 1 x rear hydraulic brake assembly, 1 pair spare brake pad,2 x Fuel Filter,4 x Tie,and any other screws required for installation[Bolt On And Go] - Package Contents: 1 x rear hydraulic brake assembly, 1 pair spare brake pad,2 x Fuel Filter,4 x Tie,and any other screws required for installation