The process of jewellery making is no less than magic! This entire process of jewellery designing involves lots of steps like designing, model making to the final step of quality check. Creating a design is the first step which is involved in the process of jewellery making The second stage, just after the designing stage is the CAD/CAM stage, which involves the use of CAD Software. Model Making is the next stage which involves the process of the conversion of resin output from CAM to silver model through the process of casting. The 4th stage is the Rubber Mould stage which plays an integral role in the process of the production. The next stage involved in the jewellery manufacturing process is the production of wax pieces. Moving on to the next step, the jewellery manufacturing process at KOSH involves the stage of casting, which is regarded as among the most complex processes. The process of casting requires experienced and skilled casters. The Filing is the next stage involved in the process of the jewellery manufacturing. Under Filing, the excess metal or solder is being removed from the piece. The Polishing stage is the final stage where the polishing of the jewellery takes place. The Rhodium plating is the penultimate stage of the jewellery manufacturing.