Search

Search

4mil Clear Security and Safety Window Film Shatterproof Glass Protective Vinyl Adhesive UV Blocking Explosion-Proof Tranparent Film, 24Inch x 10Feet

KWD 10
Brand
SW MEGICOLIM
Category
Home Décor
Weight
476 g
– 1 +

Special Features

  • ⭐92% VLT - Since its 92% VLT keeps the transparency of the window, so you can enjoy the warmth of the sun without having to worry about the harmful solar rays.
  • ⭐BREAK STRENGTH and HARDNESS: This safety film will keep the windows intact, absorb impact from break-in attempts and hold shattered glass together in case of breakage, and to protect your valuables and your family from broken glass, break-in and theft
  • ⭐SELF - ADHESIVE - Use two pieces of tape to grab onto one of the corners on each side of the film. Once you start pulling apart the tape, the backing liner should start to peel off from the window film itself. And please spray as much soapy water as possible on the glue side and glass before putting it on the window
  • ⭐APPLICATION - Bathroom, sliding doors, children's window glass, display cabinets Senior housing, villas, shopping malls, jewelry stores, frontage stores, airports, railway stations, docks, kindergartens, schools, banks glass security and a strong security needs of private house glass
  • ⭐AFTERSALES SERVICE - Whether your windows are small or big, our products come in a variety of sizes to suit your individual needs. It is usually recommended and sometimes necessary that you have more than enough film to cover the window so that you have a margin for error and can trim the excess pieces as you install. Any question, please contact me

Description

Specification:
Thickness: 4mil
VLT(visible light transmission): 92%
Break Strength: 100lbs/in
SR Hardness: >2H

Features：
PET material, Transparent, Shatterproof, Not affect appearance, Strong adhesive, Removeable, No any glue problem, Easy to inastll

Installation Steps:
Step 1. Trim films to the size you want (a little biger than you need)
Step 2. Keep Window or Glass clean
Step 3. Wet the Window or Glass with much soapy water
Step 4. Remove the adhesive film from backing liner ( Please make sure you have removed it before you apply the matte window film to glass)
Step 5. Wet the adhesive film with much soapy water
Step 6. Set up film on glass
Step 7. Squeegee away water and air bubbles with scraper
Step 8. Cut off margins and enjoy your works

Quick tip:
1. In order to easily remove the protect backing film, simply use 2 pieces of tape to apply to both sides of the corners and pull.
2. Please spray a lot of water before installation. Its better to watch the installation video of window film on YouTube before installation

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}