important!!
Be sure to check the material and width of the zipper before finding the model.
If the zipper model and width/thickness do not match, it will not work properly.

CF Zipper Slider Repair Replacement Kits for Nylon Zipper Chain

🔵 Notes
1. If the fastener chain itself is damaged, it cannot be repaired with this product.
2. Please be sure to refer to the video on the product introduction page before assembling.
3. This product is not suitable for jeans. There is no stopper, so the zipper may move during the activity.
4. Regarding the shape of plastic fasteners, if the width of the element is 7.2mm and the thickness of the element is 3mm, it complies with the standard for metal fasteners, so MF8 is applied.
5. If the zipper teeth are contaminated with foreign substances, clean them prior to repair.
6. Tools not included to disassemble damaged sliders.
7. Do not place it within reach of children or infants.

🔵 How to assemble a zipper fastener
1. For detailed assembly instructions, please refer to the videos and manuals on the product page, as well as several videos in the manual link.
2. Use tools such as nippers and drivers to remove damaged fasteners. You can check the video required to dismantle the zipper from the link in the manual. In the case of a hard fastener, be careful not to damage the fastener element when dismantling, and be careful not to injure your hand.
3. Choose a location to assemble the lower fastener piece and cover the upper piece. At this time, make sure that the fastener element (teeth) is completely inside the part.
4. Fix the crown and the pull to the upper part and assemble the bolt. If the screwdriver is small and it is difficult to join the bolt, use a larger screwdriver.