3/8 Inch Snaps with pliers are designed for setting back pieces without poking holes on materials; And the white rubber parts of pliers help keep studs and backs in place for centering and crimping.

9.5mm Diameter Silver Prong Ring Snap FastenersUse for dummy clips, keyrings,shirts, jeans, jackets, bags and crafts, etc.

Rubber tips help keep studs and backs in place for centering and crimping.

Precautions When Using:
1. For each snap set, you wil need 1 piece male snap, 1 piece female snap and 2 pieces hollow prong rings.
2. Put the hollow prong rings on the pliers lower side without hole, and the male & female snaps on the pilers upper side with hole.
3. Choose your spot to install the snap, please ensure the snaps face cloth inside & outside as the picture.
4. Insert a color hollow prong ring and a male snap into the pliers. Repeat this step with a sliver hollow prong ring and a female snap.
5. Finally you can use force-bar to prevent the snaps loose, simply use a heavy tool to knock it.

Specifications:
Material: Iron
Color: Silver, Red
Press studs diameter: approx. 9.5mm/0.37in
Prong size: approx. 3.5mm/0.13in

Packaging included:
1 x Snap Fastener Pliers (Pliers only, other accessories are not included)

NOTE:
- This item size information is just for reference only, and allow 1-2 inch differences due to manual measurement. Thanks.
- Due to the difference between different monitors, the color may be slightly different from the actual color of the item. We guarantee the style is the same as shown in the pictures.

Service:
- If you have any question, please contact with us first. We will reply you within 24 hours.
- If you are satisfied with our service and product, please show your objective evaluation. Wish you have a good shopping experience in here.