If you have one working Key Fob.
1. Insert working key into ignition and turn to ON then OFF and remove.
2. Within 10 seconds insert new cut key into ignition and turn to ON for 5 seconds then OFF and remove.
3. New key and fob are now programmed.
4. A maximum of only 8 keys can be programmed into system.

What if you don't have an available remote key?
This vehicle is not on board programmable and requires a qualified professional to program smart key remote fobs.
1. Locate an automotive locksmith in your area using the phone number or website below.
2. If your vehicle is still mobile, it may save you money by driving to the locksmith instead of having them come to you.
3. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the smart key remote fob.

ABOUT PROGRAMMING:
This remote head key fob must be cut and programmed in order to start the engine.
In order to perform the DIY programming for this remote key fob, you need to have 1 working
original key that starts your vehicle. Also, your new unprogrammed key must be cut prior to
performing self-programming.
PLEASE NOTE: Canadian vehicles require programming by a locksmith or dealership.
Not compatibility outside of USA and Canada
Please be sure to check the vehicle is Compatible with the guide below.
Please make sure that your original remote has the same exact buttons on it.

Compatible with:
2010-2019 Chevrolet Equinox
2010-2019 Chevrolet Camaro
2011-2016 Chevrolet Cruze*
2012-2017 Chevrolet Sonic
2014-2019 Chevrolet Impala
2014-2016 Chevrolet Malibu

2010-2021 GMC Terrain

2010-2012 Buick Allure
2010-2016 Buick LaCrosse
2011-2017 Buick Regal
2012-2017 Buick Verano
2014-2021 Buick Encore
* 2016 Chevrolet Cruze has 3 possible remote flip keys, please verify the key you need.