The rear view camera bracket is made of high-quality metal material, which is corrosion-resistant, rust proof, and has good waterproof performance. It is not easily damaged and can be used for a long time. The distance between the two screw holes of this reverse camera bracket is 13mm/0.5inch, suitable for rear cameras with a screw hole spacing of 13mm. Before placing an order, please confirm the distance between the two screw holes of your reverse camera. Installed on the license plate with screws, concealed installation without looseness, and the process does not require drilling, which can save you a lot of time. This rear view camera bracket is suitable for US car license plates. Usually suitable for rear cameras. Please pay attention to the top and bottom of the reverse camera image before installation to avoid reversing the reverse camera.