Features:
1 Features:
1. For Type 100mm angle grinder, and is dedicated to convert the angle grinder into a hand electric drill, realizing one machine for multiple purposes.
2. Made of high-carbon steel, high hardness, anti-rust, high toughness, high torque and durability.
3. Three-jaw chuck, firm clamping, stable and firm clamping, not easy to slip.
4. Change the angle grinder into a electric drill, easily drill, drill stainless steel, walls, tiles, metal, wood, etc.
5. M10 thread, can be directly installed on the Type 100 angle grinder.

Notice:
1. Actual color may be slightly different from the image due to different monitor and light effect. Please allow 1-3mm deviation due to manual measurement.

Specification:
Range of use: for Type 100 angle grinder
Support range: 1.5-10mm
Product Size(L x W x H):60x33mm
Material: high-carbon steel
Spindle screw: M10x1.5 thick wire
Precautions:
1. This product is only suitable for the use of Type 100 angle grinder to electric drill
2. Before installing the adapter, please install the angle grinder gasket
3. When installing a drill or a hole opener, you must first tighten it with a key
4. After the installation is complete, run idling for 1 minute to confirm that the adapter and drill bit have been installed in place and the angle grinder is operating normally
Included:
1 x Angle Grinder Electric Drill Conversion Collets(Angle Grinder and Electric Drill are not included)