بحث

بحث

AITRIP 5 قطعة Pro Mini ATmega328P 3.3 فولت 8 متر لوحة وحدة مع مذبذب كريستال متوافق مع Arduino Pro Mini استبدال ATmega128

KWD 7.500
اللون5 قطعة 3.3 فولت 8 ميجا هرتز
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
– 1 +

مميزات خاصة

  • you will get 5PCS Pro Mini Atmega328 3.3V 8Mhz
  • It has been programmed for its bootloader, without the user to buy ISP burner for programming, user-friendly.
  • This board connects directly to the FTDI Basic Breakout board and supports auto-reset.
  • Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
  • This is a 3.3V board running the 8MHz bootloader.
  • Note: Pro mini modules have a lower max current draw than the bigger UNOs and MEGAs, so do not run too many things off of VCC.

وصف

Specifications:
Main Chip: Atmega328P-AU.
The bootloader is already installed in the board.
Flash Memory: 32 KB of which 2 KB used by bootloader.
8MHz clock frequency.
USB connection off board.
Supports auto-reset.
Max 150mA output.
Over current protected.
Support external power supply 3.3V.
Size: 33mm*18mm*6mm.
14 digital input / output port: RX, TX, D2 ~ D13.
8 analog input ports: A0 ~ A7.
1 pair TTL level serial transceiver port: RX / TX.
6 PWM ports: D3, D5, D6, D9, D10, D11.

Package included:
5PCS* Pro Mini ATMEGA328P 3.3V 8MHz Module

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}