Features: Note: This kit need the external power adapter to power on the device Passive PoE Injector and PoE Splitter Kit allows low cost of delivering power over the network cable for shorter distances This kit allows power to be carried on 10/100 networks over the spare unused pairs of a CAT5 CAT5E CAT6 or CAT7 Ethernet network cable On shorter network lengths The power source could feed the wireless access point IP video surveillance cameraIp phone etc This Kit contains both very cost effective injector and splitter The injector inserts the DC voltage at the source location into the 55mm x 21mm injector plug Then the DC voltage run through the spare pairs of the 10BASE-T or 100BASE-T network cable to the Splitter side And the splitter splits the DC voltage from the network cable into the 55mm x 21mm DC jack Power feed Pins: 4/5 7/8- More instructions: There are 2 different cables for each coloreach color cable you can use respectively One is used at the router end of the Ethernet cable along with the power supply for the device you want to power The other one is used at the end of the Ethernet cable to extract the power and send it to the device to power Power from POE is generally 24v most standalone devices is 5v to 12vThis product is used with the 12 volt power supply for that cameraideal for 12Vdc It just adds the power to the Ethernet cable at one end then removes it at the camera end so you can plug it into the camera power connector If you look at the image you will see one the round connectors on the one pigtail is a male and the other is a female If you did not get a 12 volt power supply with the camera you will have to purchase one It plugs in to a wall outlet and the round plug connects to the POE injector Package Include: 2 x PoE injector cableWhite and Black; 2 x PoE splitter cableWhite and Black