This adapter card can convert the M.2 NGFF slot on the motherboard into an mSATA SSD slot
You can connect your mSATA SSD to M.2 NGFF (B+M KEY) motherboard for data transfer (Note: SSD is not included in this project)
Features:
Use mSATA solid state drives for notebooks or desktops with only M.2 NGFF interfaces

Specification:

●Supports data transfer up to 6Gbps
●Only mSATA SSDs that support SATA are supported.
●Compliant with PCI Express M.2 Specification 1.0.
●Compliant with SATA3.0 specification.
●2230, 2242, 2260 and 2280 size mSATA SSDs are supported.
●The screw can be used to fix mSATA SSD
●Supports any operating system

Please note:

✅It only supports mSATA SSD with SATA protocol.

✅It only works with B-key or B/M-key sockets.

❎It does not support M-KEY socket, NVME and PCI-E SSD.

❎It does not support Mini PCI-E (PATA), 1.8inch Micro SATA and Airbook SSD

The adapter card only connects the signal of the M.2 B+M KEY socket of the motherboard to the mSATA connector, so no driver is required.

Please shut down before use. After installation, please confirm that the riser card has been connected and then turn it on.

Package:

1*M.2 NGFF to mSATA adapter card
1*Screw