ThePoEstore 90W Gigabit PoE++ Injector, Full Duplex Gigabit Speeds, 100 M Network Range, Supports IEEE 802.3af/802.at/PoE, Plug & Play(90W)
Description:
Pass Through Data Rates: 10/100/1000Mbps
Output Power Voltage: 50VDC
Use Port Power: 30W/60W/90W
AC Input Voltage: 100 to 240VAC
AC Input Current: 0.5A 100-240VAC
AC frequency: 50 to 60 Hz
Dimensions:178mm x 80mm x 4.4mm
System Indicator:AC power
Connectors: shielded RJ-45,EIA 568A and 568B
Operating Ambient Temperature: 0℃ to 40℃
Storage Temperature: -10℃ to 50℃
Regulatory Compliance: IEEE 802.3af (15.4W)/IEEE 802.3at (30W)/IEEE802.3bt 4Pairs(60W) IEEE802.3bt (90W)
Steps: 1.
use a CAT5 or CAT6 UTP cable to connect port of Ethernet device to the DATA IN port. 2.
Connect AC cable with injector and socket. 3.
Connect the POE out port to a PD with CAT5 or CAT6 UTP cable.

