HOTRC F-08A & F-08AT 8-Channel 2.4GHz PWM Receiver
Choose the F-08A for standard 8CH PWM control, or the F-08AT when you need built-in gyro stabilization for RC cars and boats. Both share the same HOTRC 2.4GHz FHSS platform, 0-27V telemetry, and wide transmitter compatibility.
Key Features
- 8-channel standard PWM output for servos, ESCs, lights, and accessories
- 2.4GHz FHSS spread-spectrum with strong anti-interference
- Fail-safe protection on signal loss (programmable hold / cut)
- Voltage telemetry 0-27V plus signal strength return within 300m
- F-08AT only: integrated 3-axis gyro for car and boat stabilization
- Lightweight approx. 9g, compact 43x24x13mm form factor
Specifications
Channels: 8CH PWM
Frequency: 2.4GHz ISM band
Modulation: GFSK
Spread spectrum: FHSS
Input voltage: DC 4-9V
Operating current: approx. 35mA (F-08A) / 39mA (F-08AT)
Ground range: up to 300m
Air range: up to 800m
Telemetry range: up to 300m
Monitored voltage: 0-27V
Gyro: No (F-08A) / Yes, 3-axis (F-08AT, for car & boat only)
Weight: approx. 9g
Size: 43 x 24 x 13 mm
Compatible Transmitters
CT-4A, CT-6A, CT-8A, CT-10B, DS-4A, DS600, HT-5A, HT-6A, HT-8A, HT-10A.
Binding Steps
1. Power the receiver from your model's ESC or BEC.
2. Short-press the BIND button until the LED blinks rapidly.
3. Power on the HOTRC transmitter and enter bind mode.
4. Two confirmation beeps indicate successful binding; LED turns solid.
Which Model Should You Pick?
Pick F-08A for airplanes, gliders, multirotors, and projects where you want raw PWM without stabilization.
Pick F-08AT for RC cars and boats that benefit from automatic attitude correction during aggressive maneuvers.
Installation Tips
Keep the antenna away from carbon fiber, metal parts, ESCs, and video transmitters. Route it vertically or at an angle with the tip exposed to maximize range.