Empty squeeze marker bottles - you fill them, you control what goes inside.
These are refillable empty marker bodies with a sponge dauber tip. Fill one with your own acrylic ink, alcohol ink, fabric paint or dye, screw the cap back on, and squeeze to feed the tip. No valve, no pumping, nothing to clog. When it runs dry, refill it.
This pack is bottles only. Ink and paint are not included.
WHAT IS IN THE BOX
- 24 x empty squeeze marker bottles
- 24 x sponge dauber tips
- 24 x black screw caps
- Capacity: 60 ml / 2 oz per bottle
- Colour: white bottle, black cap
WHY A SQUEEZE BODY
A soft LDPE body puts the flow under your thumb: press lightly for lines, harder to flood an area. No valve to clog, no felt reservoir to dry out. If a tip does clog, swap it instead of binning the marker.
WHAT TO FILL THEM WITH
Acrylic ink and thinned acrylic paint, alcohol ink, fabric paint and dye, watercolour, or bingo dauber ink. Fill to about two thirds, leaving room to squeeze.
HOW TO USE
1. Unscrew the black cap and lift out the sponge tip.
2. Fill the bottle to roughly two thirds - do not fill to the brim.
3. Push the sponge tip back into the neck and screw the cap on.
4. Squeeze gently until ink reaches the tip, then start light and add pressure as needed.
5. Cap it between sessions. If a tip dries out, rinse it or swap in a spare.
WHERE THEY GET USED
Handstyle and tagging, fluid art and pour painting, rock and canvas work, fabric and tie-dye detail, cardmaking and scrapbooking, classroom and workshop sets, and as replacement bodies for bingo daubers.
CARE
Rinse with water while the ink is wet. Avoid solvents that attack LDPE, and keep out of direct sun. Not a food container. Adult supervision for children.