Mount your TV exactly where you want it, no stud finder needed — Studs never cooperate. This no stud TV wall mount goes anywhere on your wall using just a hammer. No power drill, no professional, no compromising on placement. A step-by-step installation video walks you through every stage so setup is frustration-free.
One mount for every TV you'll ever own — Two independent wall plates space to match any VESA pattern from 150×100mm to 1000×600mm with no bar-width limit. Upgrading to a larger TV just means repositioning two small brackets, not buying a new mount.
165 lb drywall capacity built into the engineering — Six 2.6mm × 50mm nails per plate drive in at an upward angle, using the wall's vertical load strength for a hold rated to 165 lbs. That's 65% more capacity than most competitors. Concrete and brick hardware included for permanent installations.
Leave 12 nail holes, not 32 — Most no-stud mounts use one long bar that leaves a wide horizontal strip of small holes across your wall. MI-417's split-plate design leaves 12 nail holes in two compact spots. Move out, patch two small areas, get your deposit back.
Flush to the wall, perfectly vertical — At 0.94" from wall to TV back, This no stud mount sits closer to the wall than most nail-in mounts. Included leveling pads attach to the lower VESA holes to keep the screen perfectly vertical with no forward lean. Clean, built-in look from every angle.
Pin it, check it, nail it with confidence — Slipping brackets during install are the most common complaint with split-plate mounts. The included push-pins temporarily hold each plate in position before a single nail goes in, and the included adhesive wall template and bubble level confirm placement before you commit.
Lifetime warranty and real US-based support — Every Mount-It! product ships with a lifetime warranty and access to Mount-It!'s US-based customer support team, available Monday through Friday. When a 65" screen is on the line, it helps to know someone is actually there if you need them.