مميزات خاصة

?【CREATE SMOOTH POLYURETHANE WALLS】Foam Insulation Removal Tool can eliminate uneven and messy surfaces on polyurethane-coated walls,quickly and cleanly trimming edges to create a consistently flat insulation that allows for direct installation of plasterboard,panels, or finishing—no secondary trimming and reducing subsequent work.
?【SAFE & STUD-CUTS FLAT TO STUDS FOR RELIABLE】Foam Planer Insulation Trimming Equipment comes with guards and chain-breaking system.The power head is an electric chain saw, so the handle is correctly positioned.The swivel head is designed to cut foam to the studs without damaging the studs and can be used on steel or wood studs.
?【STURDY & EXCELLENT CONSTRUCTION】Spray Foam Insulation Cutting Removal Tool Support points are made of extra-thick aluminum plate, enhancing structural stability. Resists wear during frequent use, ensuring long-term reliability for continuous projects.The inner bearing allows you to trim edges quickly and cleanly for a flat,crisp cut across the entire head.
?【ULTRA-LONG DESIGN BOOSTS EFFICIENCY】The Foam Planer Insulation Trimmer Features a 19.68-inch (50cm)/27.5-inch (70cm) scrapers, ensuring consistent cutting results even on large areas of insulation. Operating at 14.5 m/s and 1800 watts, this foam planeer Saw effective foam insulation cutting.
?【SPRAY FOAM INSULATION CUTTING REMOVAL TOOL】The foam insulation removal tool is designed for making the wall clean and tidy after polyurethane coating makes the wall not clean and smooth. Trim corners quickly and easily, by placing its head directly on the stud, it also uses a rotating head to send itself into the wall. This minimizes the amount of work required to operat the trimmer

وصف

?Spray Foam Insulation Cutting and Removal Tool: This tool cleans up messy walls after polyurethane coating. It quickly and easily trims edges and corners. By placing the blade directly against the wall stud, it can also utilize the rotating blade to automatically extend into the wall. When used correctly, it minimizes the amount of work required for trimming.
?Choose the Right Setup for Your Foam Type：This Power Planer is available in Open-Cell and Closed-Cell versions so you can match the tool to your foam—improving control, cutting feel, and overall finish quality. Built for contractors who care about results, this tool helps deliver work that's ready to hand off—without delays or unnecessary rework.

?PARAMETERS：
Name:Open/Closed Cell Foam Planer
Voltage: 220 V
Power: 1800W
Current: 8.6A
Speed: 14.5m/s
Spatula length: 19.68inch(50cm)/ 27.5inch(70cm)

?OPERATING INSTRUCTIONS
1. Firmly grasp the power cord and blade handle with both hands.
2. Thoroughly trim the bottom two feet of the wall first to prevent the cutting blade from running through debris piles.
3. Never allow the cutting blade to contact steel hooks or support brackets, as the force and speed required for rapid foam cutting may cause the blade teeth to tear on sharp edges.
4. For easier, cleaner cuts, maintain blade rotation and apply light pressure while moving the cutter upward along the wall.
5. Use a small electric drill to power the cutter for trimming around outlets, hooks, and other narrow edge areas.

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه