Made out of casting and tool steel, much improved and precise quality of taper turning attachment than our previous model , is available in Morse taper MT 1, 2 ,3 & 4 shanks. This new design gives you the freedom from old traditional method of off-setting the tailstock of your lathe , when you wanted to do the metal /wood turning in a taper profile. This comes with 2 different options to chose between a dead and a double bearing live revolving center on the front to hold the work-piece from center. The center point is hardened & precisely ground The attachment's slides movement is control through a fine metric thread screw, and can be shifted 25 mm left & right using the handle rotation. Pls note that the 1 handle rotation will off set the attachment by 1 mm The attachment's slide is provided with a brass gib for fine movement and adjustment & locking through the slide's screws & bolts. Supplied with spare and interchangeable Live revolving and dead center options that can be interchanged with each other as per user's requirements. Complete set comes packed in a plastic suitcase for better life and safety of the product.