Bring factory-quality finish work to every panel with the Dynabrade AKD05 2-Step Denibbing Kit. Engineered for automotive refinish technicians, detailers, and body shop professionals, this kit gives you the exact pneumatic tools and consumables needed to remove dust nibs, runs, and minor clear coat defects — and restore a flawless, high-gloss finish — without re-shooting the panel. Step 1 — Sand the defect. The DN1 Nitro Series 1-1/4" pistol grip mini orbital sander (model 50225) targets the imperfection with precision. Its 8,500 RPM motor and 1/8" orbit knock down nibs flat against the surrounding clear coat, while the included A3, A5, and A7 sandpaper grits (50 discs of each) let you step down progressively. The 95756 speed regulator gives you fine throttle control, and the 54086 foam-backed disc pad keeps pressure even. Step 2 — Polish back to gloss. The 57126 Dynabuffer 3" (76 mm) random orbital polisher takes over with a 14 mm orbit and 10,000 RPM, paired with the A9530 medium-density red foam pad and DynaOne 22017 fine-finish compound. Water-based and silicone-free, DynaOne removes scratches from P1500–P2000 and finer, leaving a swirl-free, hologram-free finish. Wipe down with the 16" x 16" 330 GSM A9901 edgeless microfiber towel, and the panel is delivery-ready. The 94407 Flow Control Dynaswivel keeps your air hose from binding and lets you dial flow at the tool. Backed by Dynabrade's USA engineering and used by OEM-certified shops worldwide. Kit Contents: DN1 Sander (50225) | Disc Pad Foam (54086) | A3/A5/A7 Sandpaper, 50 ea. (78994/78995/78996) | Speed Regulator (95756) | Dynabuffer Polisher (57126) | DynaOne Compound 1L (22017) | 3" Red Polishing Pad (A9530) | Microfiber Wipe (A9901) | Flow Control Dynaswivel (94407)