Mechanical
Model Number : FZ25A-1
Material : Carbon Steel
Voltage : 24V
Need to fix the bracket, please contact customer service to buy!
Precautions
Do not overload or cool in place
When the magnetic powder clutch/brake is working, its , speed and slip power must not exceed the rated cooling mode (natural cooling, forced air cooling, water cooling) depending on the slip power generated during actual operation. Cooling air requires filtration of Oil and water. Conditional, temperature detection, alarm device can be installed to prevent excessive temperature and affect the service life of magnetic powder. (temperature 80 ° C)
About life
The service life of the magnetic powder clutch/brake is the life of the magnetic powder. Generally speaking, the magnetic powder has a service life of 4,500-7,500 hours under the condition of no overload; however, its service life can be extended several times In the state of being over, such as: reducing the working of the magnetic powder clutch/brake, relative slip speed And the slip power is 50%-70% of the rated value. That is to say, when , the margin Is enlarged as much as possible.
About
After the magnetic powder clutch/brake is used in the , the magnetic powder will wear-in during the early use, and the will decrease slightly, which can be compensated by adjusting the current.
Characteristic
1, high-precision , control range is very wide, and high control accuracy, the transmission of and excitation current into the correct ratio, can achieve high-precision control.
2Excellent durability and long service life The super-alloy magnetic powder with high heat resistance, wear resistance, oxidation resistance and corrosion resistance has long service life.
Stable characteristics of superior stability The magnetic properties of the magnetic powder are good, and the bonding force between the powder particles is stable, the sliding is very stable, and the can be kept constant regardless of the relative number of revolutions .
4 Continuous sliding operation uses a cooling structure with excellent heat dissipation effect and uniform heat distortion, and high heat resistance of magnetic powder, allowing for connection and braking power and sliding power, and smooth sliding operation without causing vibration.
5 The connection is smooth and the impact is slightly small when there is no impact connection, and it can be started and stopped smoothly without impact. And the resistance is slightly smaller, which will not cause useless heat.
6 Suitable for high-frequency operation in response to agile and fast and special heat dissipation structure, suitable for high-frequency operation.
7 Lightweight, maintenance-free, long-life type, simple and lightweight, using high-temperature coils and special grease bearings, and special treatment for the armature that is easy to wear, prolonging the service life.
Scope of use
Printing machinery, paper machinery, bag making machinery, papermaking machinery, wire and cable machinery, coiling machinery, wire machinery, bale bag machinery, textile machinery, weaving machinery, woodworking machinery, test equipment, simulation load, various mechanical precision tension control, general Industrial equipment, and other general industrial machinery.
Application route
1. Buffer start and stop: The cushioning effect of the smoothing characteristic and the constant characteristic at the time of connection is the peak with stable acceleration and no impact.
2, continuous sliding, tension control
3, limiter
4, high-speed response
5, power absorption
6, positioning stop
7, for analog load
==========
High-concerned chemical : None
Material : Carbon Steel
Origin : Mainland
Voltage : 24V
Model Number : FZ25A-1