Original Bamboo P2S Hotend Cooling Fan – Genuine OEM Replacement for Dual-Nozzle System, Manages Heat Creep and Clogs, Closed-Loop Speed Control,for Bambu Lab P2S 3D Printer Parts
[Manages heat creep for P2S dual-nozzle system] This original Bamboo P2S hotend cooling fan directs precise airflow to the hotend heatsink, removing excess heat that can soften filament before extrusion. Stable thermal conditions inside the extruder assembly promote consistent filament flow and reduce clogging during long multi-material prints. A genuine Bambu Lab P2S spare part for reliable dual-nozzle operation
[Closed-loop speed adjustment for balanced cooling] The P2S cooling fan uses closed-loop control, allowing the printer firmware to automatically adjust rotation speed based on real-time hotend temperature. Higher airflow engages during demanding high-temperature sessions with ABS or PC, while lower speeds operate quietly during idle or low-temperature phases. An essential Bambulab P2S replacement part for thermal managemen
[Closed-loop speed adjustment for balanced cooling] The P2S cooling fan uses closed-loop control, allowing the printer firmware to automatically adjust rotation speed based on real-time hotend temperature. Higher airflow engages during demanding high-temperature sessions with ABS or PC, while lower speeds operate quietly during idle or low-temperature phases. An essential Bambu P2S replacement part for thermal managemen
[Straightforward DIY installation with included screws] Replacing the P2S hotend cooling fan requires a standard H1.5 Allen key (not included). Power off the printer, remove the toolhead cover, disconnect the old fan, and secure the new unit with the included BT2x5 screws. Detailed step-by-step instructions are available on the Bambu Lab Wiki. A simple maintenance task for P2S owners
[Restores original cooling performance for P2S printers] Over time, fans wear out or accumulate debris, leading to reduced airflow and higher hotend temperatures. Installing this genuine Bambu Lab P2S hotend cooling fan brings back factory-level cooling efficiency. Your P2S maintains optimal thermal management for high-speed, high-temperature printing with engineering-grade filaments
Description
Original for Bambu Lab P2S Hotend Cooling Fan – Genuine OEM Replacement Part
Original Bamboo Lab P1P P1S Extruder Replacement Unit with Stainless Steel Driving Gear & Built-in Filament Break Detection Sensor – Quiet Reliable Extrusion for P1 Series 3D Printers
KWD 23
-14%
Bamboo Textured PEI Plate with QR Code for X2D/P2S X1/X1C/P1P/A1/P1S Build Plate 256x256MM Excellent First-Layer Adhesion&Improved Durability for PLA, TPU, PETG,ABS and Nylon,ect. for Bambu lab Plate
KWD 6
Original Bambu Lab Extruder Unit Front Cover Assembly OEM Replacement Part for P2S 3D Printer – Extruder Front Protective Cover – Dustproof Housing for Extruder Unit for Bambu Lab P2S Accessories
KWD 12.500
Original Extruder for Anycubic Kobra S1 with Material Break Detection PCBA and Filament Cutter Detection – Replacement Extruder Assembly Compatible with Kobra S1 Combo, OEM Spare Part
KWD 16.500
