Mechanical
Two shaft Magnetic Powder Clutch & Brakes 25Nm GUANGTAI Magnetic Powder Clutch FL25S
model

N.m)
Voltage
(V)
Current
(A)
Rotate speed (r/min)
D0
D1*L1
D2
D*L
L2
L0
b
FL06S
6 24
1.0
1400
120
44*10
52-M4
14*22
25
141
4
FL15S
15
24
1.0
1400
155
52*15
65-M5
16*30
33
183
5
FL25S
25
24
2.0
1400
183
58*17.5
78-M6
20*40
44.5
223
6
FL50S
50
24
2.0
1400
218
75*18
100-M6
25*53
54.5
264
8
FL100S
100
24
2.0
1000
290
90*20
120-M8
30*70
73
352
8
FL200S
200
24
3.0
800
335
110*26
140-M10
35*75
77.5
405
10
FL400S
400
36
5.0
800
398
130*36
200-M12
45*98
100.5
501.5
12
FL600S
600
36
5.0
800
460
160*40
200-M12
50*106
108.5
550
14
The magnetic powder clutch is a combination of a transmission unit (input shaft) and a driven unit (output shaft). The space between the two sets of cells is filled with granular magnetic powder (recessed about 40 microns). When the magnetic coil is not conductive, the will not be transmitted from the transmission shaft to the driven shaft. However, if the coil is electromagnetically energized, the magnetic powder will attract hardening due to the action of the magnetic force, and the will be transmitted between successive slidings.
Product Features:
High-precision control has a wide control range, high control precision, and the and excitation current are correctly proportional, enabling high-precision control.
Superior durability and long life The super-alloy magnetic powder with high heat resistance, wear resistance, oxidation resistance and corrosion resistance has a long service life.
Constant Characteristics of Magnetic Group The magnetic properties of the magnetic powder are good, and the bonding force between the powder particles is stable, the sliding is very stable, and it has no relationship with the relative number of revolutions, and can maintain a constant for a long time.
The continuous sliding operation uses a cooling structure with excellent heat dissipation effect and uniform heat distortion, and high heat resistance of the magnetic powder allows the connection and braking power and sliding power to be large, and can smoothly slide and operate without causing vibration.
The connection is smooth, and the impact when there is no impact connection is extremely small, and it can be smoothly started and stopped without impact. Moreover, the resistance is extremely small and does not cause useless heat.
It is suitable for high-frequency operation and responds to agile and fast and special heat dissipation structure, suitable for high-frequency operation.
Lightweight, maintenance-free, long-life type, simple and lightweight, using high temperature coils and special grease bearings, and wear-resistant special treatment for the armature that is easy to wear, prolonging the service life.
Product Usage:
1.Buffer start and stop:The cushioning effect of the smoothing characteristic and the constant characteristic at the time of connection, that is, the peak with stable acceleration and no impact.
2.continuous sliding, tension control
3. limiter
4.high-speed response
5.power absorption
6.positioning stop
7.for analog load
Scope of application:
Printing machinery, paper machinery, bag making machinery, papermaking machinery, wire and cable machinery, winding machinery, wire machinery, bale bag machinery, textile machinery, weaving machinery, woodworking machinery, test equipment, simulation load, various Mechanical precision tension control, general industrial equipment, and other general industrial machinery.
==========
High-concerned chemical : None
Voltage : 24V
Material : Cast Iron
Model Number : FL25S
Origin : Mainland
Certification : None