Air Bearings
Accommodate Combined Loads Solid Structure Wide Application
Bearing Type: U Groove Bearing
Model: 103712UR2.5
Inner Diameter: 10mm
Outer Diameter: 37mm
Inner Height: 12mm
Outer Height: 14mm
U Groove Angle：R2.5
Quantity: 1PC
Bearing Type: U Groove Bearing
Model: 103712UR3
Inner Diameter: 10mm
Outer Diameter: 37mm
Inner Height: 12mm
Outer Height: 14mm
U Groove Angle：R3
Quantity: 1PC
Bearing Type: U Groove Bearing
Model: 103712UR4
Inner Diameter: 10mm
Outer Diameter: 37mm
Inner Height: 12mm
Outer Height: 14mm
U Groove Angle：R4
Quantity: 1PC
U-Groove Bearing Use
U-groove bearings for precision general purpose parts compared with the general mechanical parts need to be more meticulous and careful installation and commissioning treatment.
1) Keep the bearing and its surrounding environment clean as far as possible in closed or semi-enclosed conditions for installation and use;
2) The need to use suitable tools and methods (heating) to install bearings to avoid savage knocks to cause a strong impact on the bearing damage the internal channel;
3) Keep the bearing well lubricated and use the appropriate lubricant;
4) Pay attention to bearing anti-rust avoid use in wet places installation and disassembly need to wear gloves;
5) Develop daily operating specifications for the use of bearings;
U-Groove Bearing Storage
U-Groove bearings in the factory are coated with the right amount of rust resistant oil and anti-rust paper packaging as long as the packaging is not destroyed the quality of the bearing will be guaranteed.
However when storing for a long time it is advisable to store on a shelf above 30cm on the ground under the condition that the humidity is less than 65% and the temperature is about 20 ℃. In addition the safe place should avoid direct sunlight or touch with