Search

Search

Home / Avodah Hardware / Door Hardware
48 Inch Door Bottom Sweep for 2-1/4 Inch Wood Doors, Staple-On Exterior Door Bottom Weather Seal with Double Bubble and Drip Edge, Brown Front Door Sweep Avodah Hardware Made in USA in Kuwait 48 Inch Door Bottom Sweep for 2-1/4 Inch Wood Doors, Staple-On Exterior Door Bottom Weather Seal with Double Bubble and Drip Edge, Brown Front Door Sweep Avodah Hardware Made in USA in Kuwait 48 Inch Door Bottom Sweep for 2-1/4 Inch Wood Doors, Staple-On Exterior Door Bottom Weather Seal with Double Bubble and Drip Edge, Brown Front Door Sweep Avodah Hardware Made in USA in Kuwait 48 Inch Door Bottom Sweep for 2-1/4 Inch Wood Doors, Staple-On Exterior Door Bottom Weather Seal with Double Bubble and Drip Edge, Brown Front Door Sweep Avodah Hardware Made in USA in Kuwait

48 Inch Door Bottom Sweep for 2-1/4 Inch Wood Doors, Staple-On Exterior Door Bottom Weather Seal with Double Bubble and Drip Edge, Brown Front Door Sweep Avodah Hardware Made in USA

KWD 20.500
Category
Door Hardware
Weight
318 g
– 1 +

Special Features

  • ✅ PERFECT FIT FOR THICK WOOD DOORS: This door bottom sweep is built for 2-1/4 inch thick wood doors. Not thinner slabs. No guesswork. It lines up clean and seals across the full width. If you need a true fit for a thick wooden exterior door, this is the right size.
  • ✅ STOPS COLD AIR FAST: Cold air coming in? This bottom of door weatherstrip creates strong contact with the threshold. The double bubble compresses when the door closes. Drafts are reduced. Light gaps disappear. Your entry feels sealed again.
  • ✅ SEALS BIGGER GAPS: Older 3/8" strips often fail. This exterior door bottom weather seal has a taller 1/2" profile for better reach. It fills larger gaps under the door. That means better protection from wind, moisture and outside air.
  • ✅ STRONG BASE, SOFT SEAL: The bottom strip is firm so it does not bend or sag over time. The sealing bubbles are softer and compress when the door closes. This door bottom sweep stays sturdy while still creating a tight seal against the threshold.
  • ✅ BUILT FOR REAL INSTALL: This door bottom installs after removing the slab. Staple it on. Add caulking if preferred. Once secured, it stays put. No sliding. No twisting. Just a fixed seal that stays aligned.
  • ✅ EASY TO CUT TO SIZE: Need to trim it? No problem. This 48 inch door sweep can be cut cleanly with a fine-tooth blade. Adjust the length carefully and get a tight fit across your entry.
  • ✅ BLOCKS BUGS AND DRAFTS: Small gaps invite problems. This under door weather seal helps block insects, dust and airflow from slipping underneath. Close the door and create a tighter barrier between inside and outside.
  • ✅ MATCHES COMMON PROFILES: Replacing an old strip? This door bottom seals design matches many standard exterior door profiles. It is ideal when you want an exact style replacement without changing the frame.
  • ✅ DESIGNED FOR EXTERIOR USE: This exterior door weather stripping bottom is made for entry doors that face real weather. Rain, wind and seasonal shifts. When measured correctly, it seals without binding or preventing the door from closing.
  • ✅ MADE IN THE USA: This front door sweep is manufactured in the United States. Materials are consistent. The brown finish blends with wood tones. It delivers dependable performance where sealing matters most.

Description

The Staple-On Fixed Double Bubble Sweep is built for real 2-1/4 inch thick wooden exterior doors. At 48 inches long, it provides full-width coverage for standard wide slabs and creates a stronger seal at the threshold. The double bubble design compresses when the door closes, helping reduce cold drafts, light gaps, moisture and small debris from slipping underneath. This door bottom sweep is supported by a firm backing that keeps it straight, while the flexible bubbles adjust to the floor surface for consistent contact. The integrated drip edge helps guide rainwater away from the entrance instead of allowing it to run under the door. This exterior door bottom weather seal installs by removing the door and stapling it to the bottom edge. Many installers also use a bead of caulk for added hold. Ideal as an under door weather seal for wooden doors without a bottom groove, this fixed design stays aligned and provides dependable sealing performance. Made in the USA for consistent quality and built to replace worn door bottom seals on thick exterior slabs.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}