Item Type: High Voltage Generator
Product Size: Approx. 55x24x22mm / 2.17x0.94x0.87in
Input Current: 0.5A-2A (Depending on the Input Voltage)
Input Line Length: 10cm/3.94in
High Voltage type: DC Type
Input Voltage: 3V-6VOutput Voltage: About 700KV (Please Pay Attention to Security When Used)
Output Current: 0.5A
Output Line Length: 10cm/3.94in
High Voltage Poles Ignition Distance: 1.5cm / 0.6in (1.5cm Is Maximum Distance, 1cm / 0.4in Is Better)

Note:
1.Input the power of 3-6v, output two levels of terminal can produce 1.5cm length purple high temperature arc, instant ignition paper, single high voltage line can also discharge of any metal body, working without a crack sound.
2.On the input power: 3.7v li battery can be used in series, idle cell phone battery (to remove the protective board, recommended capacity above 2000mAh) or Ni Cd, Nimh battery pack, 4V or 12V batteries (12V battery works best).
3. The power time is not above 20 seconds each time. Since the output power is strong, it must be driven by rechargeable battery or storage battery. Improper voltage and long work will easily damage the high voltage module. Be careful when testing and using!
2. Ignite distance keep within 1cm.

Module Usage Precautions:
1. Avoid power on when No load. You must adjust the appropriate distance for high voltage terminal before power on, high voltage line arc distance is proportional to the battery voltage and capacity.
2. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(3. The module power, the internal is not easy for heat dissipation, so it can not work for a long time.
4.To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage when in the arc state.
5. Small capacity series li battery is 7.2 V, voltage will