Description:
Crafted from sturdy PVC material, these clamps offer a practical alternative to metal. Each clamp measures approximately 1.79 inches long by 0.61 inches wide (45.5mm x 15.5mm) and is engineered to cradle pipes with an outside diameter (OD) of about 40mm (1-1/2 inches).

KEY DESIGN AND FUNCTIONALITY:
U-Shaped Channel: The open-top design allows you to easily lay a pipe into the clamp after it is mounted, or to remove a section of pipe without fully disassembling the support. The inner contour is shaped to cradle the pipe snugly.
Flat Mounting Base: The broad, flat base provides stability and distributes pressure when screwed to a surface. The pre-formed holes are sized for standard wood or sheet metal screws (screws not included).
Rust-Proof Plastic: Unlike metal clamps that can rust or stain pipes, PVC is unaffected by water and most household chemicals, making it a suitable choice for damp environments like under-sink cabinets or laundry areas.

INSTALLATION IS STRAIGHTFORWARD:
Plan your pipe run and mark the locations for support clamps (typically every 24-36 inches for horizontal runs).
Position the clamp base against the wall or framing member.
Secure it using appropriate screws for your wall material (e.g., wood screws for studs, drywall anchors for hollow walls).
Press the pipe firmly into the U-channel of the clamp. It should fit snugly but not be forced.

PRODUCT SPECIFICATIONS:
Material: PVC
Color: White
Clamp Dimensions: 1.79" L x 0.61" W (45.5mm x 15.5mm)
Recommended Pipe/Tubing OD: 40mm (1-1/2 inches)
Quantity in Set: 12 Clamps

Achieve a cleaner, more organized look for your piping projects with this set of reliable and easy-to-install pipe clamps