The Satco S13149 is a wattage and CCT selectable LED HID replacement engineered for fast Type B retrofits that remove the ballast. Choose 36W, 45W, or 60W on the lamp to set the target lumen level, and select 3000K, 4000K, or 5000K color to match site preference. Delivering up to roughly 9600 lumens at 80 CRI, it replaces 200W to 250W HID while cutting energy and maintenance. A universal 120-277V driver, EX39 extended mogul base, and durable corncob design support a wide range of fixtures. Built for real-world conditions, S13149 is approved for enclosed fixtures and specified for base-down operation. Integrated 4 kV surge protection, power factor greater than 0.9, and THD under 20 percent support stable performance on commercial circuits. The 120 degree beam spreads light broadly, while the translucent polycarbonate lens tempers glare inside clear globes and prismatic acorns. Rated life is 50,000 hours with an operating range from minus 25 C to plus 50 C. Typical applications include post tops, acorn globes, barn lights, and select vertical-socket area luminaires that accept an EX39 base. Because this is a Type B retrofit, the existing ballast must be bypassed, and the lamp is not dimmable with wall controls; dimming is only via the on-lamp wattage selection. Standardize on one SKU, tune output and color in the field, and keep inventories simple across mixed properties.