مميزات خاصة

SERVICE REPLACEMENT (VALVE ONLY): This is the bare 6310BFAA00 valve body and 14" linkage rod. Designed for fleet mechanics replacing an existing Ridewell valve where the mounting bracket and air fittings can be reused. (Does NOT include mounting bracket or push-to-connect fittings).
PRESSURE DUMP LOGIC (N/O): Features "Pressure Dump" (Normally Open) logic. You must APPLY air pressure to the pilot port to dump the suspension. (Verify your existing valve requires air to dump; do not use for Zero-Pressure systems).
DIRECT REPLACEMENT: The exact OEM replacement valve found in the 6310BFAB13 kit. Perfect for swapping out leaking valves on Ridewell 240, 260, and 266 suspensions without removing the welded or bolted chassis bracket.
HIGH FLOW SPECS: Features standard 3/8" NPT ports (Requires your own fittings). Delivers rapid air response with minimal deadband to maintain accurate ride height during loading and unloading.
INCLUDES LINKAGE: Comes with the Ridewell 14" adjustable brass linkage and lever arm pre-assembled, allowing for quick height adjustment during installation.

وصف

The Cost-Effective Replacement for Fleet Maintenance.The Ridewell 6310BFAA00 is the "Service Pack" version of the popular Extreme Air height control valve. If your truck or trailer already has a Ridewell valve installed, there is no need to buy the full kit with extra brackets you will just throw away.
What is Included?
1x Extreme Air Valve (Pressure Dump)
1x Adjustable Linkage (14")
1x Lever Arm
(Note: You must reuse your existing Mounting Bracket and Air Fittings).
Technical Logic:
This valve uses Pressure Dump logic (Apply Air = Dump). It is the standard replacement for most lift axles and dump trailers using Ridewell suspension.
MPN: 6310BFAA00
Dump Type: Pressure Dump (N/O)
Ports: 3/8" NPT (Fittings not included)
Application: Replacement Valve Only

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه