Search

Search

Home / XYZTOOL / 3D Printing Supplies
Original Bamboo P2S Feed Buffer, Replacement Filament Buffer, Reduces Tension Fluctuations for Smooth Feeding，Only Compatible with the Bambu Lab P2S 3D Printer in Kuwait Original Bamboo P2S Feed Buffer, Replacement Filament Buffer, Reduces Tension Fluctuations for Smooth Feeding，Only Compatible with the Bambu Lab P2S 3D Printer in Kuwait Original Bamboo P2S Feed Buffer, Replacement Filament Buffer, Reduces Tension Fluctuations for Smooth Feeding，Only Compatible with the Bambu Lab P2S 3D Printer in Kuwait Original Bamboo P2S Feed Buffer, Replacement Filament Buffer, Reduces Tension Fluctuations for Smooth Feeding，Only Compatible with the Bambu Lab P2S 3D Printer in Kuwait Original Bamboo P2S Feed Buffer, Replacement Filament Buffer, Reduces Tension Fluctuations for Smooth Feeding，Only Compatible with the Bambu Lab P2S 3D Printer in Kuwait Original Bamboo P2S Feed Buffer, Replacement Filament Buffer, Reduces Tension Fluctuations for Smooth Feeding，Only Compatible with the Bambu Lab P2S 3D Printer in Kuwait

Original Bamboo P2S Feed Buffer, Replacement Filament Buffer, Reduces Tension Fluctuations for Smooth Feeding，Only Compatible with the Bambu Lab P2S 3D Printer

KWD 16.500
Brand
XYZTOOL
– 1 +

Special Features

  • 【The Function of Feed Buffer】This feed buffer is mounted on the back of the printer. It relieves filament tension fluctuations during feeding and ensures smooth material delivery.
  • 【When to Replace】Replace your feed buffer if you notice visible damage to its components or structural parts that causes feeding failure, such as stuck sliders, cracked housing, or loose tube connectors. It is also recommended for replacement after confirmation from technical support that the buffer is the root cause of your feeding issues.
  • 【Installation Requires】Installation requires only basic tools and no special skills. You will need the new Bambu Lab P2S feed buffer (included in the package) and a standard H2.0 hex wrench (not included). The step-by-step process makes it easy to replace your old buffer in minutes.
  • 【Easy Installation & Quick Replacement】Complete buffer removal and installation in simple steps. Just disconnect the PTFE tubes, remove the screws and cable to take off the old buffer, then connect the wire, fix the new buffer with screws, and reconnect the PTFE tubes. Only a H2.0 hex wrench is needed for fast, tool-friendly installation without complex operations.
  • 【How to Verify Successful Installation】Power on the printer and start an AMS filament loading process. If the loading completes normally, the buffer replacement is successful. If not, please check the connection of the buffer cable and PTFE tubes, then try again.
  • 【Application】This feed buffer is only compatible with the Bambu Lab P2S 3D printer and will not fit other models.

Description

✅ Perfect Fit for Bambu Lab P2S Feed Buffer Replacement
This is a dedicated feed buffer accessory designed exclusively for the Bambu Lab P2S 3D printer. Installed on the rear of the printer, it effectively alleviates filament tension fluctuations during feeding, ensuring smooth and consistent filament delivery to prevent jams, uneven extrusion, or printing interruptions.
✅ When to Replace Your Old Feed Buffer
Replace your feed buffer if you notice visible damage to its components or structural parts that causes feeding failure, such as stuck sliders, cracked housing, or loose tube connectors. It is also recommended for replacement after confirmation from technical support that the buffer is the root cause of your feeding issues.
✅ All You Need: 1 Buffer + 1 Hex Wrench
Installation requires only basic tools and no special skills. You will need the new Bambu Lab P2S feed buffer (included in the package) and a standard H2.0 hex wrench (not included). The step-by-step process makes it easy to replace your old buffer in minutes.
4. Step-by-Step Installation Guide
✅ Quick & Simple Installation for Your Bambu Lab P2S Feed Buffer
Remove the Old Buffer:
First, remove the PTFE tubes: press the left-side inlet connector to pull out the feed tube, then push the buffer slider toward the outlet to expose the other connector, press and remove the outlet tube.
Use the hex wrench to remove the 2 fixing screws, flip the buffer over to reveal the connecting wire, press the connector lock to unplug the cable, then remove the old buffer.
Install the New Buffer:
Connect the wire to the new buffer's connector, making sure the locking buckle is aligned correctly. Snap the buffer into the rear mounting holes and tighten the 2 screws with the hex wrench.
Reconnect the PTFE tubes on both sides of the new buffer.
✅ Verify Success & Guaranteed Compatibility with Bambu Lab P2S
After installation, start your printer and run an AMS filament loading test. If the feeding process completes without errors, your Bambu Lab P2S feed buffer replacement is successful. If it fails, double-check the wire connection and PTFE tube seating before retrying.
Important: This feed buffer is only compatible with the Bambu Lab P2S 3D printer and will not fit other models.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}