Specification:
Item Type: Digital Display Potentiometer
Material: Fire​proof ABS
Resistor Value: 10KΩ
A Parameter Minimum Value Range: -1000~1000
1. Press And Hold The A Key, When The First Digit Is Flashing.
2. Press B To Adjust The Value
3. Press A Again To Switch The Second, Third And Fourth Digits.
4. Press A Again To Store And Exit
B Parameter Setting Multiplier: 0.1-5.0
1. Press And Hold B, The Four Digits Will Flash.
2. Press A To Increase The Value By 1 Each Time, And Adjust To The Appropriate Value.
3. Press B Again To Store And Exit.
C Magnification Setting: x1, x2, x10
1. Press B Briefly To Switch The Magnification, 1x or 2x or 10x
2. 2 Seconds Later, It Will Be Stored Automatically.
D Decimal Point Setting:
X.XXX, XX.XX: 1. Press A Briefly To Switch The Decimal Point.
XXX.X, XXXX: 2. Automatic Storage After 2 Seconds
Caution:
1. Standard Potentiometer Linearity Error Of 5% Or More
2. The Display Range Is From -1 To 9.
3. When The Minimum Display Value Is Less Than -1000 Or More Than 1000, Consider CO2 Or C10 First.

Package List:
1 x Digital Display Potentiometer

Notice:
This module is a potentiometer module and cannot be used to regulate power loads directly. It can only be used as a replacement for potentiometers on controllers and devices.