CerMark LMM-6000 Laser Marking Coating is a high-performance black marking solution designed for use on stainless steel and other hard metal surfaces. This advanced laser marking paste produces permanent, high-contrast black marks when used with CO2 lasers (30W+) or fiber lasers (200 kHz+). Whether you're creating industrial ID tags or custom metal art, LMM-6000 ensures durable and legible results every time.
Formulated with a thicker consistency to prevent settling, LMM-6000 may be thinned with ethanol, acetone, or MEK for optimal application. It's most effective when applied evenly using an airbrush or foam brush. Avoid using isopropyl alcohol, as it negatively impacts performance.
Note: LMM-6000 is not recommended for use on chrome, brass, copper, pewter, or coated/painted surfaces. For chrome and softer metals, use CerMark LMM-14 instead.
For best results, clean the surface thoroughly, apply a thin, even coat, allow to dry completely (air dry ~2 min), and laser mark with tested speed and power settings. After marking, wash with warm water to remove residue and reveal the finished black mark.
CerMark LMM-6000 Laser Marking Coating is a high-performance black marking solution designed for use on stainless steel and other hard metal surfaces. This advanced laser marking paste produces permanent, high-contrast black marks when used with CO2 lasers (30W+) or fiber lasers (200 kHz+). Whether you're creating industrial ID tags or custom metal art, LMM-6000 ensures durable and legible results every time.
Formulated with a thicker consistency to prevent settling, LMM-6000 may be thinned with ethanol, acetone, or MEK for optimal application. It's most effective when applied evenly using an airbrush or foam brush. Avoid using isopropyl alcohol, as it negatively impacts performance.
Note: LMM-6000 is not recommended for use on chrome, brass, copper, pewter, or coated/painted surfaces. For chrome and softer metals, use CerMark LMM-14 instead.
For best results, clean the surface thoroughly, apply a thin, even coat, allow to dry completely (air dry ~2 min), and laser mark with tested speed and power settings. After marking, wash with warm water to remove residue and reveal the finished black mark.
CerMark Metal Marking Solution creates solid black engraving on uncoated metals. The solution is brushed on to clean metal and then laser engraved. After engraving, wash the area with water to remove the unused solution. The product is shipped as a concentrate and requires thinning with denatured alcohol.

The 100 grams of solution will cover an estimated 1000+ square inches when applied using a brush and an estimated 2000+ square inches when applied using the spray method. Coverage (When mixing with denatured alcohol): Brushing 1:1 - 1000 square inches, Spraying 2:1 - 2000 square inches.

The 250 grams of solution will cover an estimated 2500+ square inches when applied using a brush and an estimated 5000+ square inches when applied using the spray method. Coverage (When mixing with denatured alcohol): Brushing 1:1 - 2500 square inches, Spraying 2:1 - 5000 square inches.