Description

In the battlefield of renovation, where precision and efficiency are pursued, every detail reveals the essence of craftsmanship. This grooving machine of ours opens a new avenue of efficient and precise grooving. It adopts a high-performance all-copper motor with surging power, which can easily cope with both brick walls and concrete. You can control the depth and width of the groove as you like to meet your needs. You are not only choosing a tool, but also a reliable partner to improve your work efficiency and quality.

Details

External Carbon Brush Port: It makes carbon brush replacement more convenient and efficient.

Visible Headshell: It is convenient for you to observe the working condition of the saw blade at any time.

Heat Dissipation Holes: They ensure timely heat dissipation, avoiding damage to this product due to high temperatures.

Application

This product can be applied to concrete grooving, floor grooving, red brick grooving, cutting off rebar, marble grooving, and so on. It is widely used on construction sites, home decoration, road renovation, and cement factories.

Specifications

Style: Modern

Color: Green, Black, Silver

Material: Plastic, Aluminum, Copper, Iron

Surface Treatment: Spraying Painting

Plug Standard: US Standard

Mount Type: Handheld

Assembly Required: Yes

Power Source: Corded Electric

Voltage: 110V, 50-60HZ

Load Power: 4000W

No-load Speed: 6500RPM

Grooving Angle: 360°

Saw Blade Diameter: 12.1cm/ 4.76 in

Grooving Depth Adjustment: 30mm/1.18inch

Grooving Width Adjustment: 30mm/1.18inch

Length of Water Pipe: 4m/ 13.12 ft

Power Cord Length: 3 m/ 9.84 ft, 1.5m/4.92 ft (Water Pump)

Product Length: 48cm/18.89 in

Handle Width: 4cm/ 1.57 in

Head Shell Length: 16cm/ 6.3 in

Toolbox Size: 55*18*29cm/21.65*7.08*11.42in

Water Pump Max. Flow Rate: 4L/0.88gal/ min

Water Pump Rated Power: 30W

Water Pump DC Input: 12V 2A

Water Pump Max. Head: 10m/32.81 ft

Gross Weight: 8.2kg/ 18.08 lbs

Package Size: 32*60*30cm/12.6*23.62*11.81 in

Package Included

1* Grooving Machine

1* Toolbox

5* Saw Blades

1* Water Pump

1* Water Pipe

1* English Manual

Other Accessories for Assembly

Notes

1. Please read the instruction manual carefully before use and pay attention to the safety matters therein.

2. Please note that when using a vacuum cleaner (not included), the front protective cover should be fully pressed against the wall/floor when the base plate is set to the bottom position.

3. Please note that in order to prolong the service life, please check the wear of carbon brushes regularly. When the spark is large, the carbon brushes need to be replaced promptly.

4. Please note that when cleaning the cutting head, water should be avoided from entering the machine body through the vent, which may affect the service life of the machine.

5. Please note that when the rotating speed of the machine body slows down during use, do not use brute force to operate it hard to avoid overloading and burning the machine, first lift the machine and idle it for 5-30 seconds.

6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.