How are TEMCo Industrial couplers better than competitors?
Our couplers are machined out of carbon steel and plated with Zinc Nickel (Zn-Ni), which offers corrosion resistance, as well as an extra layer against normal wear and tear. Each coupler is pressure tested with hydraulic oil right off the factory line.

So, whether you're buying a replacement or making an upgrade to your skidsteer or agricultural equipment, TEMCo's hydraulic flat face couplers are designed to withstand your roughest working condition.

Rotate the knurled collar on the female coupler so that the ball and indent in the collar are misaligned. Doing so will prevent the collar from being pulled back. This feature ensures a safe working condition. To disengage the coupler, simply rotate the collar into alignment and pull the collar back away from the opposing male coupler.

Features
Carbon Steel construction, Zn-Ni coating, and Ti-Ni Male Poppets.
Titanium Nitride, often used for high speed steel drill bits, provides a longer wear life and proper seal after persistent usage.

Material: Carbon Steel
Coating: Zinc Nickel

Temperature Range:
Polyurethane Seal: -13° to 193°F
Nitrile Rubber (NBR) Seal: -4° to 176°F
PTFE Seal: -148° to 262°F

Rated Flow: 50.19 Gallons Per Minute
Rated Pressure: 3625 PSI

Contact Us! We'll give you the support you need.