104-1023-006 | 104-1023 Hydraulic Motor | Direct Replacement for Eaton Char-Lynn 2000 Series | Cast Iron High Torque | Displacement 100cc/r | Maximum Pressure 275BAR | 2 Bolt Flange Mount |
【OE Exact Match & Wide Compatibility – No Mismatch Hassle】 OE Part Numbers: 104-1023-006 104-1023. 1:1 exact match for Eaton Char-Lynn 2000 Series, no modifications needed—direct drop-in replacement, no mismatch hassle.
【Stable Output Performance】Suitable for various applications:Displacement (m³): 100; Maximum working pressure (BAR): 275; Recommended flow rate (LPM): 75; Maximum speed (RPM): 924; Maximum torque (N.m): 395; Output shaft: Straight shaft; Mounting flange: Diamond 2-hole; Rotation direction: Clockwise.Utilizing an advanced gear design, it achieves stable high torque output at low speeds, effectively avoiding power decay and stalling during heavy-load operation.
【High Volumetric Efficiency & Anti-Heat Degradation Design】Equipped with an advanced gear ring structure, it boasts a volumetric efficiency of up to 96%, resulting in extremely low energy loss. Even under continuous high-load conditions (such as zero-turn lawnmowers and snowplows), it maintains stable torque and controllable temperature rise, preventing power decay or seal failure due to overheating, significantly reducing equipment downtime.
【Leak-Free Design & All-Weather Durability】 The housing is made of precision cast iron in one piece, with a black anti-rust paint coating for corrosion resistance and impact resistance. SAE O-ring seals with dust caps are standard at the inlet and outlet, completely eliminating external leakage. Each motor undergoes 100% pressure testing before leaving the factory to ensure leak-free operation under harsh conditions.
【Professional Installation Guide (Must Read)】⚠️ Before installation, please verify that your equipment part number matches this motor. If in doubt, please send us your model number or original factory code, and we will confirm it for you. Before connecting the new motor, thoroughly flush the hydraulic lines to remove impurities or water from the old oil. Apply clean hydraulic oil to the O-rings; tighten the connections and then lock them to the manufacturer's specified torque. It is strongly recommended to replace the hydraulic oil filter and fluid simultaneously, which can extend motor life by more than 30%.
101-1037-009 1011037009 101-1037 1011037 Hydraulic Gerotor Motor for Eaton Char-Lynn H Series
KWD 53.500
104-1032-006/104-1032 Hydraulic Motor | Direct Replacement for Eaton Char-Lynn 2000 Series | Cast Iron High Torque | Displacement 157cc/r | Maximum Pressure 1650 PSI | SAE A 2 Bolt Flange
KWD 83.500
1pcs 3C081-82200 3C081-82202 3C081-82204 Hydraulic Pump for Kubota M7060 M8540 M8560 M9540 M9960 Tractor
KWD 118.500
101-1004-009 | 101-1004 Hydraulic Motor | Direct Replacement for Eaton Char-Lynn H Series | Cast Iron High Torque | Displacement 160cc/r | Maximum Pressure 124BAR | 4-Hole Flange |
KWD 56
