Chemical system Highbond FHB II Vinylester resin with maximum performance in cracked concrete.Supporting materials: Certified for: Concrete from C20/25 to C50/60 cracked and uncracked Concrete Also suitable for: Concrete C12/15Advantages: Highbond FHB II system reaches the highest load values in cracked concrete. ato. Thus, fewer fixing points and smaller plates are needed. FIS HB resin cartridge and FHB II-P/PF vials provide the same performance and can be used with FHB II-A S (short version) or L (long version) anchors. You can then choose the cheapest solution according to the required requirements. Pre-dosed resin in FHB II-P/PF vial can be used in uncleaned holes. This makes it a cost-effective and quick solution. It is the perfect solution for a few installations or submerged applications. The special formulation used in the FHB II-PF vial ensures a particularly rapid installation. The size of the FIS HB injection resin cartridge fits well for series installations.Applications: Balustrades Facades Stairs Metal Brackets Machinery Installation of tanks Pylons Shockproof protections Metal construction Wooden constructionOperation: FHB II is a torque control chemical anchor for through-through and non-through installation. The anchor bar can be installed with the resin in FIS HB cartridge or with the resin in FHB II-P / FHB II-PF HIGH SPEED vial and is firmly anchored in the hole. When tightening the hex nut the cones of the anchor bar are invoked against the resin shell that expands against the wall of the hole. Styrene-free vinylester resin completely seals the hole. When using the resin in the vial install the anchor bar through a roto-percussion motion using a rotary hammer. Use the RA-SDS mounting tool art. No. 62420.